love cooking text Kitchen blind
Reference: E3029
- Light filtering: 100% polyester
- Voile: 70% PVC and 30% polyester
- Blackout: 75% PVC and 25% fiberglass
Easy installation: product easy to mount in two clicks
Easy to remove and replace
Measurement selection: wall-ceiling or recess installation
- Wall-ceiling: Measure the window and add 5 cm on each side; for example, for 100×180 cm, order a 110×190 cm blind.
- Recess: Measure the recess and subtract 5 mm from the width; for 100×180 cm, order 99.5×180 cm.
Available sizes:
- Width: from 40 cm to 180 cm
- Height: from 40 cm to 300 cm
100% customizable product: if you wish to modify any design element, do not hesitate to contact us.
Mechanism size: 8 cm wide (vertical) and 6 cm high (horizontal)
Available fabric types:
- Light filtering: lets light through while offering privacy
- Voile: lets light through with visibility (ideal for businesses or high floors)
- Blackout: completely blocks light and visibility
Acoustic insulation: reduces noise penetration
Thermal insulation: reduces heat and cold transfer
Available chain and bracket colors: white and black
Chain position: left or right
Safety: reduces UV sunlight penetration
100% custom-made product
Hypoallergenic, antimicrobial (does not accumulate dust), and fire-resistant product
Easy to clean: with a damp cloth and mild soap
Tube diameter: 43 mm / 450 g/m
Weight per square meter:
- Light filtering: 190 g/m²
- Voile: 470 g/m²
- Blackout: 537 g/m²
100% secure payments
Application instructions are available on our website, and with the product you will receive a QR code on the packaging that will redirect you directly to them.
Custom roller blinds are a modern and inexpensive alternative to decorate any window. The installation and assembly of Tensticker blinds is very easy, you can do it yourself without investing too much effort and time. Please note that our blinds come fully assembled and only require installation of the brackets.
RECOMMENDED MATERIAL1. Ruler and carpenters ruler.
2. Spirit level
3. Drill to make fixing holes.
4. Hammer and screwdriver
5. Screws and dowels for fixing the blind support.
INSTALLATIONBefore installing the blinds, keep in mind that you must use dowels and screws appropriate to the chosen surface and place of instalation. Make sure to leave enough room to avoid the blinds getting in the way of the window handles when the blinds are up. You must also take into account the position of the furniture and radiators. Finally, remember to measure the same distance on both sides of the window:
1. Choose the location and position of the supports and mark with a pencil the points where the two blind supports will be joined with a screw, taking into account the measurements indicated above. With the help of a tape measure, a long ruler or a strip and a spirit level mark both points, so that both supports are completely straight. Leave enough room to open the window when the blind is up.
2. Drill the holes for the dowels. Once you have drilled the holes with the corresponding drill bit, insert the plugs into the wall with the help of a hammer and screw the two brackets into the wall, in the corresponding holes.
3. Finally, insert the roller blind into the respective notches of each bracket. This mechanism is very easy to assemble, and allows you to remove or replace a roller blind very quickly, without any effort.
Express delivery within 24 hours to your home address available.
