Black Tiles Bathroom Mural
Reference: F6845Black Tiles Bathroom Murals add elegance and luxury to your bathroom. With the matt finish and sophisticated geometrical design, the tiles will transform your bathroom into a modern and sophisticated paradise. The product is manufactured using non-woven wallpaper and has a grammage of 180 grams per square metre. It has a durability of 10-15 years and can be easily removed by wetting the product with a sprayer.
Why This Product Should Be Used for Decoration
Black Tiles Bathroom Wall Mural provides an opportunity to make a bold statement in your bathroom. The unique black and tile shape will create a dramatic contrast against the backdrop of the bathroom. The tiles are easy to apply on walls, and the tools needed to complete the job are a roller, a brush and a cutter. It can also be easily cleaned with a damp cloth and a little neutral soap. With the Black Tiles Bathroom Photomurals, you can create an attractive solution to the design of your bathroom and create a style that will last for years.
How To Apply This Product
Applying Black Tiles bathroom murals is very simple and straightforward. First, you should make sure that the wall is completely clean and free from debris. Next, you need to apply glue on the wall or on the product, depending on the surface you’re working with. Once the glue is applied, you can start to place the product. Finally, you can use a roller, a brush and a cutter to finish the job and create a unique design for your bathroom.
Why Buy This Product In Our Online Shop
Black Tiles waterproof wall murals for bathrooms are only available in our online shop. Not only can you find the highest quality tiles, but you can also be sure that they are totally waterproof and long-lasting. Plus, you can easily create a stunning look that will last you for years.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.