Concrete and Wood Texture Bathroom Wallmural
Reference: F6843This Concrete and Wood Texture Bathroom Wallmural can be used to create a variety of different looks and designs, from rustic to modern. The combination of the two materials provides a unique and interesting look that can be used to enhance any space. This product is matte coloured, and is manufactured in non-woven wallpaper. It can be applied using glue on the wall or on the product, and the tools to apply it are a roller, a brush and a cutter. It can be cleaned with a damp cloth and a little neutral soap. Its grammage is 180 grams per square metre, and its durability is 10-15 years. It can be easily removed by wetting the product with a sprayer, and is produced and shipped in rolls of 50 centimetres wide. It has an M2 reaction to fire certification.
Why this product should be used for decoration?
Concrete and Wood Optic Bathroom Wallmural is an excellent choice for your space due to its unique and interesting look. The combination of the two provides an aesthetic that is both rustic and modern at the same time. It is ideal for any room, creating a natural environment with a modern twist. It's versatility and ease of application make it an ideal choice for home decor.
How to apply this product?
This Concrete and Wood Texture Bathroom Photomural can be applied using glue on the wall or on the product itself. It is recommended to use a roller, a brush and a cutter to ensure that it is properly applied. To clean it, simply use a damp cloth and a little neutral soap.
Why buy this product in our online shop?
Our concrete and wood texture wall mural is of excellent quality, with a grammage of 180 grams per square metre, and a durability of 10-15 years. It is easy to apply and remove, making it a great choice for any space. Plus, with our special discounts and offers, buying this product from our online shop is an even better deal!
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.