Electronic circuit Wallpaper
Reference: F6812Add an eye-catching design aesthetic to your walls and décor with the Electronic circuit Wallpaper! Featuring an exclusive design of an interconnected network of electronic components such as resistors, transistors, capacitors, inductors and diodes, this wall mural will give your home or office a unique touch no other products can offer. Manufactured with matt colours, this non-woven wallpaper has a grammage of 180 g/m2 and a durability of 10-15 years. It is applied using glue and the tools to achieve this are a roller, a brush, a cutter and a sprayer. You can also easily clean this mural with a damp cloth and a little neutral soap. The product is shipped in rolls 50 cm wide and it has an M2 reaction to fire certification.
Why This Product Should Be Used for Decoration
Adding a touch of science and technology to your home or office will make all the difference in your décor. With the Electronic circuit Wall Mural, you don't just get a unique design of an interconnected network of electronic components, but you also get a product that is high-quality, long-lasting and easy to apply and clean. Make a statement and impress your family, friends and colleagues by displaying the Electronic circuit Wallpaper in your interior.
How to Apply This Product
The Electronic circuit Wallpapers are applied using glue and require the use of a roller, a brush, a cutter and a sprayer to achieve the perfect result. Make sure to apply the glue evenly on the back of the product and on the wall or surface where you want to place the mural. Use the roller for an even application and then cut away the excess pieces with the cutter. Finally, spray some water on the surface and the wall mural will stick perfectly.
Where This Product Can Be Placed For Perfect Decoration
The Electronic circuit Wall Murals are the perfect choice for any home or office looking to add a touch of technology, science and art to their interior décor. As it is produced in rolls 50 cm wide, you can get creative and apply the mural to any surface you want. Whether it’s the walls, doors or furniture, the Abstract Wall Murals will add a unique style to your home or office décor.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.