Electronics Skull Wallpaper
Reference: F6814Electronics Skull Wallpaper is a fabulous way of transforming any room, creating a space where anyone can think, relax and be inspired!
Why This Product Should be Used for Decoration
This unique Electronics Skull Wallpaper with its electronic skull design can bring a new level of sophistication to any home. It's manufactured in matt colours and comes in rolls 50 centimetres wide, making it the perfect choice for both small and large spaces.
Thanks to its non-woven material, it can be applied with glue directly on the wall or on the product. The tools you'll need to apply it are a roller, a brush and a cutter. It can be cleaned with a damp cloth and a little neutral soap and its durability is about 10-15 years.
It also has a grammage of 180 grams per square metre and an M2 reaction to fire certification. You can easily remove it by wetting the product with a sprayer.
How to Apply This Product
This Electronics Skull Wall Mural is easy to install and you can do it in just a few steps:
- Clean the walls and remove dirt, dust and any other debris from the surface.
- Fix the mural to the wall using the appropriate glue.
- Position the mural on the wall and press it firmly.
- Carefully cut out the excess material.
- Roll the mural with a roller or brush, removing any bubbles.
- Let it sit overnight to dry.
Where This Product Can Be Placed For a Perfect Decor
Bring a unique electronic skull design to any room with this Electronics Skull Wallpaper to give it a modern flair. It's perfect for bedrooms, living rooms, offices, entryways and more! The graphic design will make your space look vibrant and stylish. You'll love the way that it adds a touch of sophistication to your decor.
Strip width: 50 cm
Thickness / weight: 180 g/m2
Custom-made: select the measurements you want and we will adapt the design
100% customizable product: if you want to modify any element of the design, do not hesitate to contact us
Matte finish (satin): non-glossy finish with bright and elegant colors
Easily washable product: Can be gently cleaned with a damp cloth or a non-abrasive sponge and water
Easy installation (bubble-free): Stick directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
100% recyclable product: made with eco-friendly inks
100% secure payments
Also, it will be wrapped in bubble wrap inside a sturdy cardboard package that protects the product during shipping.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.