Brick Wall Effect bricks wallpaper
Reference: P7089A visually compelling texture that emulates an architectural brick wall pattern, providing a semblance of urban construction within an interior space.
The Brick Wall Effect bricks wallpaper design is a stunning graphic representation of brick wall texture and pattern, providing an impressive imitation of real architecture. This non-woven wallpaper is manufactured in matt colours and has a grammage of 180 grams per square metre, ensuring durability and longevity. The unique design makes it a perfect choice for interior decoration, adding a touch of urban charm to any space.
Why this product should be used for decoration
The Brick Wall Effect bricks wallpaper is a versatile and stylish choice for interior decoration. Its realistic brick wall pattern adds a modern and trendy touch to any room, creating a visually appealing and unique atmosphere. Whether used in a residential or commercial space, this wallpaper is sure to make a bold statement and elevate the overall decor!
How to apply this product
Applying the Brick Wall Effect bricks wallpaper is a simple process that can be easily done with the help of basic tools such as a roller, brush, and cutter. The non-woven material ensures easy application with glue, and it can be cleaned with a damp cloth and neutral soap. With a durability of 10-15 years, this wallpaper is a long-lasting and practical choice for interior design.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.