Classic tile tile effect wallpaper
Reference: P12564Introducing our Classic tile tile effect wallpaper, a stunning addition to your home decor! This beautiful design features an elegant tile effect that captures the essence of classic aesthetics, bringing a touch of sophistication to any space. Its matt colours and non-woven material create a warm and inviting atmosphere, making it perfect for both modern and traditional interiors. The wallpaper is easy to apply with glue and can be effortlessly cleaned with a damp cloth and a hint of neutral soap, ensuring lasting beauty.
Why this product should be used for decoration
The Classic tile tile effect wallpaper is an inspiring choice for decoration, transforming your walls into captivating focal points. Imagine the charm it brings to your living room, kitchen, or hallway! This tile effect wallpaper not only enhances your space with its classic elegance but also provides a durable finish that withstands the test of time. Elevate your home’s style effortlessly!
How to apply this product
Applying the Classic tile tile effect wallpaper is simple and straightforward! Just use glue on the wall or the product, and with the help of a roller, brush, and cutter, you’ll achieve a perfect finish. Enjoy the transformation!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.