Cubical 3D orange pattern geometric wallpaper
Reference: P9146This captivating design features a cubical pattern that creates a visually engaging 3D effect. With a mix of orange and cream cubes set against a dark backdrop, it adds a distinctive touch reminiscent of modern aesthetics. Perfect for those seeking a dynamic and artistic flair.
Transform your space with our Cubical 3D orange pattern geometric wallpaper, featuring a stunning design that brilliantly combines geometric shapes and vibrant orange hues. This modern masterpiece captivates the eye and adds a fresh touch to any room. The intricate pattern of cubes creates a sense of depth and dimension, making it perfect for contemporary interiors!
Why this product should be used for decoration
The Cubical 3D orange pattern geometric wallpaper is the perfect choice for those looking to elevate their home decor. Its striking design effortlessly enhances any environment, making it an inspiring backdrop for your everyday moments. Imagine how this wallpaper can transform a dull room into a vibrant sanctuary, filled with energy and creativity!
How to apply this product
Applying the Cubical 3D orange pattern geometric wallpaper is simple! Use glue to adhere it to your wall, employing a roller, brush, and cutter for a flawless finish. Enjoy a refreshing new look in no time!
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.