Floral Medallion Pattern ornamental wallpaper
Reference: P8550A symmetrical pattern featuring floral medallions in a repeating design. Each medallion is composed of intricate petals with a centralized bloom, evoking a classic ornamental aesthetic.
The Floral Medallion Pattern ornamental wallpaper features a stunning design with intricate tile, cross, and floral elements. The symmetrical and repeat pattern creates a visually appealing and ornamental look that adds elegance to any space. Manufactured in matt colours, this non-woven wallpaper has a grammage of 180 grams per square metre, ensuring durability for 10-15 years. Applying this wallpaper is easy with glue, a roller, brush, and cutter. It can be cleaned with a damp cloth and neutral soap, and its M2 reaction to fire certification ensures safety. This wallpaper is shipped in rolls 50 centimetres wide and can be easily removed by wetting the product with a sprayer.
Why this product should be used for decoration
The Floral Medallion Pattern ornamental wallpaper is the perfect choice for adding a touch of sophistication to any room. Its intricate design and durable material make it a stunning and long-lasting decorative option for homes and businesses alike.
How to apply this product
Applying the Floral Medallion Pattern ornamental wallpaper is a simple process. Use glue to affix it to the wall or product, and utilize a roller, brush, and cutter for a seamless application.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.