Leafy Geometry geometric wallpaper
Reference: P8951A contemporary geometric leaf pattern is featured, incorporating modern aesthetics to enhance an interior space. The design is an intersection of nature and geometry, expressing stylish elegance.
The Leafy Geometry geometric wallpaper features a stunning design with a combination of leaves, florals, and geometric patterns, making it a perfect addition to any stylish and contemporary interior. The matt colours give it a sophisticated look, while the non-woven material ensures durability and easy application. This wallpaper is not only visually appealing but also practical, with a grammage of 180 grams per square metre and a durability of 10-15 years. Applying it is a breeze with just some glue, a roller, a brush, and a cutter. Cleaning is also easy, requiring only a damp cloth and a little neutral soap. Additionally, it has an M2 reaction to fire certification, ensuring safety. The Leafy Geometry geometric wallpaper is a must-have for anyone looking to enhance their space with a touch of nature and modernity!
Why this product should be used for decoration
The Leafy Geometry geometric wallpaper is the perfect choice for decoration, adding a stylish and contemporary touch to any interior. The combination of leaves, florals, and geometric patterns creates a unique and visually appealing design that is sure to elevate any space. This wallpaper is a true statement piece that brings nature indoors in a modern and sophisticated way, making it an ideal choice for those looking to create a stylish and inviting atmosphere.
How to apply this product
Applying the Leafy Geometry geometric wallpaper is a simple process that requires just some glue, a roller, a brush, and a cutter. Start by preparing the wall and then apply the glue before hanging the wallpaper. Smooth out any air bubbles with the brush, and trim any excess with the cutter. With these easy steps, you can effortlessly transform your space with the stunning Leafy Geometry geometric wallpaper.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.