Scandinavian jurassic pattern dinosaurs wallpaper
Reference: P5942Introducing our stunning Scandinavian jurassic pattern dinosaurs wallpaper! This unique design features adorable dinosaurs in a playful pattern, perfect for decorating your child's room. The wallpaper is manufactured in matt colors, giving it a modern and stylish look. Made from non-woven material, it is easy to apply using glue and can be cleaned with a damp cloth and neutral soap. With a grammage of 180 grams per square meter, it is durable and long-lasting, with a lifespan of 10-15 years. Removal is a breeze, simply wet the product with a sprayer. Our kid's Scandinavian wallpaper with a motif of dinosaurs is produced and shipped in rolls that are 50 centimeters wide. It also holds an M2 reaction to fire certification, ensuring safety. Transform your little one's room into a Jurassic wonderland with this captivating wallpaper!
Why Scandinavian Jurassic Wallpaper Should be Used for Decoration
Looking for the perfect wallpaper to create a whimsical and enchanting atmosphere in your child's room? Our wallpaper in Scandinavian style with dinosaurs is the answer! With its adorable dinosaur design and playful pattern, it adds a touch of magic to any space. Transform your child's room into a prehistoric paradise where their imagination can run wild. This wallpaper is not only visually appealing but also durable and easy to maintain. It's the ideal choice for creating a captivating and inviting space for your little one.
How to Apply Scandinavian Jurassic Wallpaper
Applying our wallpaper with a Scandinavian Jurassic pattern and dinosaurs is a breeze! Start by preparing the wall or surface where you want to apply the wallpaper. Make sure it is clean, dry, and free of any debris. Apply a thin, even layer of glue to the wall using a roller or brush. Carefully align the wallpaper with the desired position and smooth it out using a paintbrush or roller. Trim any excess wallpaper using a cutter for a perfect fit. Voila! You have transformed your space with our captivating wallpaper.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.