simple leaves pattern Living room wallpaper
Made to your exact measurementsWhy this simple leaves pattern Living room wallpaper should be used for decoration?
Add a touch of simplicity and elegance to your living room with our Simple Leaves Pattern Living Room Wallpaper! The beautiful design features delicate leaves in a stylish pattern, creating a visually appealing and calming atmosphere. This wallpaper is perfect for adding a natural and artistic element to your home decor. With its matt colors and non-woven material, it exudes a high-quality and sophisticated feel. Transform your living room into a serene oasis with this stunning wallpaper!
How to apply this simple leaves pattern Living room wallpaper?
Applying our Simple Leaves Pattern Feature Wallpaper Living Room is a breeze! Start by preparing the wall surface and ensuring it is clean and smooth. Use a roller or brush to evenly apply glue onto the wall or directly onto the wallpaper. Carefully align the wallpaper with the desired position on the wall and smooth it out using a paintbrush or roller to remove any air bubbles or wrinkles. Trim the excess wallpaper with a cutter for a seamless finish. It's that simple! Elevate your living room decor effortlessly with this easy-to-apply wallpaper.
Buy now at a discount!
Installation tools
50 cm wide rolls
Premium non-woven 180g
Delivery in 3–5 working days
Exclusive Tenstickers design
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.
Enter your measurements