Textured Brick Impressions bricks wallpaper
Reference: P7402A visually engaging interior with a textured design mimicking classic masonry. The aesthetic conveys a faux brick impression, adding depth and character to the space through its intricate detailing.
The Textured Brick Impressions bricks wallpaper features a striking design that incorporates elements of concrete, cement, and masonry. With its realistic brick impressions and textured finish, this wallpaper adds a touch of urban sophistication to any interior design. The faux masonry effect creates a sense of depth and dimension, making it a perfect choice for those looking to elevate their space with a modern industrial aesthetic. The wallpaper is manufactured in matt colours and made from non-woven material, ensuring durability and ease of application.
Why this product should be used for decoration
Textured Brick Impressions bricks wallpaper is the ideal choice for adding a contemporary edge to any space. Its realistic brick impressions and textured finish create a unique focal point, making it an inspiring option for interior design projects.
How to apply this product
Applying Textured Brick Impressions bricks wallpaper is a simple process that can be done using glue, a roller, a brush, and a cutter. The wallpaper is easy to clean with a damp cloth and neutral soap, and it has a durability of 10-15 years. When it's time for a change, it can be easily removed by wetting the product with a sprayer.
Thickness / weight: 150 g/m2
Finish: Matte (satin): non-glossy finish with vivid and elegant colors
Roll sizes:
1. 10 m x 50 cm
2. 3 m x 50 cm
100% customisable product: if you want to modify any element of the design, do not hesitate to contact us
Easily washable product: Can be gently cleaned with a damp cloth or non-abrasive sponge and water
Easy application (bubble-free): Glue directly onto the paper or wall
Suitable surface: Any flat surface
Installation tool kit available
Easy to clean: with a damp cloth and mild soap (do not use harsh products)
Fireproof certificate: M2
Easy to remove from the wall: peels off dry
Rapport / case (product repeat): 50cm
100% recyclable product: made with eco-friendly inks
Application instructions are available on our website, and with the product, you will receive a QR code on the packaging that will direct you straight to them.
Recommended materials:
1. Glue
2. Bucket
3. Ruler/tape measure
4. Spirit level
5. Glue brush
6. Brush/roller
7. Cutter
8. Sponge or cloth.
Before wallpapering (preparation):
Surface: The wall must be dry, clean, free of grease and free of any residue from previous wallpaper. Fill and smooth any large imperfections.
Glue: Mix one packet of glue (150g) with 4-5 litres of water. Leave to stand for 5-10 minutes and stir. This is sufficient for up to 25 m².
Temperature: Do not apply the wallpaper at temperatures below 10∘C or in low humidity. The optimum temperature is 18−21∘C.
Application:
Marking: Use a spirit level and ruler to draw vertical guide lines every 50 cm on the wall. Start from a window frame if applicable.
Pasting: Apply a thin layer of paste to:
Option 1: Directly onto the wall (slightly wider than the roll).
Option 2: Evenly on the back of the paper, from the centre outwards. Fold the ends so that the glued parts touch and leave to rest for a few minutes to allow it to soak slightly.
Hanging: Place the top of the roll on the wall and align it with the guide line. Slide gently if necessary.
Smoothing: Use the brush from the centre outwards (top to bottom) to remove air bubbles. Avoid getting glue on the brush if it has been applied to the wall.
Continuing: Repeat the steps for the following rolls, ensuring that the edges fit together and match the design.
Clean: Remove excess glue with a damp sponge or cloth.
After gluing:
Secure: Smooth the entire surface with the roller.
Drying: Small bubbles will disappear as they dry. Keep the room temperature above 10∘C for the first few days, avoiding excessive heating.
Express delivery within 24 hours to your home address available.